QALAM Series · 3D printer by 3DISM, Pakistan
QALAM Pro 300
Engineered without compromise.
₨ 275,000
In stock — ships across Pakistan
A 500 mm/s CoreXY 3D printer with a full 300 × 300 × 300 mm enclosed build volume and 350 °C all-metal hotend — professional speed and serious capacity, built in Pakistan.
Machines are paid by bank transfer (no cash on delivery) — we confirm everything on WhatsApp before you pay, and ship your machine assembled & calibrated. 7-day returns, even after use.
27 litres of enclosed build space
A full 300 × 300 × 300 mm cube of actively temperature-managed volume — engineering materials without a draft in sight.
500 mm/s. All day.
Rigid CoreXY motion at 500 mm/s and 11,000 mm/s² acceleration, with input shaping and pressure advance tuned per machine — speed that never costs you corners.
350 °C. Every material.
All-metal high-performance hotend sustains 350 °C — PLA to polycarbonate, nylon, and carbon-fiber composites. Your material, your rules.
Touchscreen + free remote monitoring
Full-HD touchscreen running 3DISM's own Klipper fork, plus 3DISM Remote — watch and control prints from any browser, free for life, zero setup.
Built and supported in Pakistan
Designed, assembled and serviced by 3DISM. Local spare parts, local warranty, and support on WhatsApp in your language — no import gamble.
About the QALAM Pro 300
The QALAM Pro 300 is the flagship of the QALAM series — a high-speed, fully enclosed CoreXY 3D printer engineered by 3DISM for makers, engineers and small manufacturers who need parts fast, day after day.
Fast is the floor; accurate is the standard. The redesigned CoreXY motion system runs at 500 mm/s with 11,000 mm/s² acceleration, kept honest by input shaping and pressure advance tuned on every unit. Prints that take other machines a weekend come off the QALAM overnight.
And there is room to use that speed: a full 300 mm cube — 27 litres — of enclosed, actively managed build space, with a 350 °C all-metal hotend and 125 °C AC heatbed that open up everything from PLA to polycarbonate, nylon and carbon-fiber composites.
Because it is built here, it is supported here: spare parts, upgrades and warranty service are all local, with real humans on WhatsApp.
Inside the QALAM
Engineered without compromise
Extrusion
DXC dual-drive extruder
A top-of-the-line direct-drive extruder with dual hardened drive gears and a low-friction DXC coating — grippy, precise filament control from flexible TPU to abrasive carbon-fibre composites, with none of the slipping or grinding cheaper extruders suffer at speed.
Hotend
350 °C all-metal hotend
An all-metal hotend that sustains 350 °C — hot enough for PLA and PETG right through to polycarbonate, nylon and carbon-fibre-filled engineering materials. Your material, your rules.
Speed
500 mm/s CoreXY motion
A rigid CoreXY motion system runs at 500 mm/s with 11,000 mm/s² acceleration, tuned per machine with input shaping and pressure advance so corners stay sharp at full pace. Prints that take a bedslinger all weekend come off a QALAM overnight.
Enclosure
Fully enclosed chamber
A fully enclosed, actively managed chamber holds heat steady so high-temperature materials like ABS and ASA print without warping, cracking or delaminating — and keeps fumes and noise in.
Bed
125 °C heated bed
A high-temperature heated bed reaches 125 °C for rock-solid adhesion of warp-prone materials like ABS and ASA, on a spring-steel PEI flex plate that pops finished prints off with a single flex.
Calibration
Automatic bed leveling
Fully automatic bed leveling maps the surface and compensates before every print, so a perfect first layer isn't a ritual — it just happens. No paper, no knobs, no guesswork.
Technical specifications
Build & Motion
- Build volume
- 300 × 300 × 300 mm
- Kinematics
- CoreXY
- Max print speed
- 500 mm/s
- Max acceleration
- 11,000 mm/s²
- Motion tuning
- Input shaping + pressure advance (firmware-level)
Extrusion & Hotend
- Extruder
- Direct drive, BMG dual-drive with DXC low-friction coating
- Max hotend temperature
- 350 °C all-metal
- Filament diameter
- 1.75 mm
- Materials
- PLA, PLA+, PETG, ABS, ASA, HIPS, PC, TPU/TPE, Nylon (PA, PA12), CF/GF composites
Bed & Chamber
- Heatbed
- AC silicone, up to 125 °C, full-surface uniformity
- Build surface
- Spring-steel PEI flex plate
- Leveling
- Automatic 3-point Z with pre-print mesh compensation
- Enclosure
- Fully enclosed, active chamber fans with independent temperature management
Electronics & Firmware
- Firmware
- Klipper (3DISM's own fork) on Linux
- Controller
- 32-bit ARM processor
- Stepper drivers
- TMC2209 silent, StallGuard-enabled
- Power
- 110 / 220 V AC
Display & Connectivity
- Display
- Full-HD HDMI touchscreen
- Connectivity
- Wi-Fi
- Remote access
- 3DISM Remote — free lifetime cloud monitoring, browser-based, no VPN or port forwarding
Physical
- Machine dimensions
- 500 × 500 × 570 mm (W × D × H)
- Weight
- ≈ 20 kg
In the box
- Assembled & calibrated machine
- Power cable & toolkit
- Quick-start guide
QALAM Pro 300 — questions & answers
How much does the QALAM Pro 300 cost in Pakistan?
The QALAM Pro 300 costs ₨ 275,000. Machines are paid by bank transfer, and we confirm stock, delivery time and the delivery cost to your city on WhatsApp before you pay.
Who makes the QALAM Pro 300?
3DISM designs, builds and calibrates the QALAM Pro 300 at its workshop on G.T. Road in Kot Addu, Punjab, Pakistan. QALAM is 3DISM's own range of 3D printers.
What materials can the QALAM Pro 300 print?
PLA, PLA+, PETG, ABS, ASA, HIPS, PC, TPU/TPE, Nylon (PA, PA12), CF/GF composites. A 350 °C all-metal hotend, a heated bed up to 125 °C and a fully enclosed chamber let it print engineering materials such as ABS, ASA, polycarbonate and nylon without warping.
How fast is the QALAM Pro 300?
Up to 500 mm/s with 11,000 mm/s² acceleration on a CoreXY motion system, with input shaping and pressure advance tuned on every unit.
QALAM Pro 300 or QALAM Pro 400: which should I buy?
Both share the same platform, speed, hotend and touchscreen — the difference is size. The QALAM Pro 300 builds up to 300 × 300 × 300 mm (₨ 275,000); the QALAM Pro 400 builds up to 400 × 400 × 400 mm for large parts and production batches (₨ 375,000).
Does the QALAM Pro 300 come with a warranty and local support?
Yes. Every QALAM comes with a local warranty serviced in Pakistan, spare parts stocked locally and support on WhatsApp — ask us for the current warranty terms. You can also watch and control prints from any browser with 3DISM Remote, free for life.
How is the QALAM Pro 300 delivered?
It ships assembled and calibrated to any city in Pakistan. We confirm the courier, timing and any delivery cost for your city before dispatch.
Ready when you are.
Order the QALAM Pro 300 now on WhatsApp — or if you need a bigger canvas, have a look at the QALAM Pro 400.