QALAM Pro series · 3D printer
QALAM Pro 400
Bigger canvas. Same precision.
₨ 375,000
In stock — ships across Pakistan
The same 500 mm/s CoreXY speed, scaled to a massive 400 × 400 × 400 mm enclosed build volume — 64 litres for large-format parts and production batches, without the wait.
Paid by bank transfer only — we confirm stock, delivery and the total on WhatsApp before you pay.
Every 3D printer is sold under our 3D printer terms of use.
64 litres of enclosed build space
A 400 × 400 × 400 mm cube — print helmets, enclosures, cosplay armour, jigs and production batches in one piece. No splitting, no gluing.
500 mm/s. All day.
Rigid CoreXY motion at 500 mm/s and 11,000 mm/s² acceleration, with input shaping and pressure advance — speed that never costs you corners.
350 °C. Every material.
All-metal high-performance hotend sustains 350 °C — PLA to polycarbonate, nylon, and carbon-fiber composites. Your material, your rules.
Full-HD touchscreen
Start, level and watch prints from a full-HD touchscreen running Klipper firmware.
Build volume
64 litres of enclosed build space
A 400 × 400 × 400 mm cube — print helmets, enclosures, cosplay armour, jigs and production batches in one piece. No splitting, no gluing.
About the QALAM Pro 400
The QALAM Pro 400 takes the Pro 300 platform and scales it up for large-format work: bigger single-piece prints, higher batch counts, and more room for production — 64 litres of build volume, well over double the Pro 300.
Big does not mean slow. It shares identical motion and thermal specifications with the Pro 300 — the same 500 mm/s CoreXY system at 11,000 mm/s², the same 350 °C all-metal hotend and 125 °C bed, the same fully enclosed chamber and the same touchscreen. Moving between the two machines feels identical, just bigger.
For workshops, service bureaus and product developers who keep running out of bed space, this is the machine that ends the compromise.
Inside the QALAM
Engineered without compromise
Extrusion
DXC dual-drive extruder
A top-of-the-line direct-drive extruder with dual hardened drive gears and a low-friction DXC coating — grippy, precise filament control from flexible TPU to abrasive carbon-fibre composites, with none of the slipping or grinding cheaper extruders suffer at speed.
Hotend
350 °C all-metal hotend
An all-metal hotend that sustains 350 °C — hot enough for PLA and PETG right through to polycarbonate, nylon and carbon-fibre-filled engineering materials. Your material, your rules.
Speed
500 mm/s CoreXY motion
A rigid CoreXY motion system runs at 500 mm/s with 11,000 mm/s² acceleration, with input shaping and pressure advance so corners stay sharp at full pace. Prints that take a bedslinger all weekend come off a QALAM overnight.
Enclosure
Fully enclosed chamber
A fully enclosed, actively managed chamber holds heat steady so high-temperature materials like ABS and ASA print without warping, cracking or delaminating — and keeps fumes and noise in.
Bed
125 °C heated bed
A high-temperature heated bed reaches 125 °C for rock-solid adhesion of warp-prone materials like ABS and ASA, on a spring-steel PEI flex plate that pops finished prints off with a single flex.
Calibration
Automatic bed leveling
Fully automatic bed leveling maps the surface and compensates before every print, so a perfect first layer isn't a ritual — it just happens. No paper, no knobs, no guesswork.
Technical specifications
Build & Motion
- Build volume
- 400 × 400 × 400 mm
- Kinematics
- CoreXY
- Max print speed
- 500 mm/s
- Max acceleration
- 11,000 mm/s²
- Motion tuning
- Input shaping + pressure advance (firmware-level)
Extrusion & Hotend
- Extruder
- Direct drive, BMG dual-drive with DXC low-friction coating
- Max hotend temperature
- 350 °C all-metal
- Filament diameter
- 1.75 mm
- Materials
- PLA, PLA+, PETG, ABS, ASA, HIPS, PC, TPU/TPE, Nylon (PA, PA12), CF/GF composites
Bed & Chamber
- Heatbed
- AC silicone, up to 125 °C, full-surface uniformity
- Build surface
- Spring-steel PEI flex plate
- Leveling
- Automatic 3-point Z with pre-print mesh compensation
- Enclosure
- Fully enclosed, active chamber fans with independent temperature management
Electronics & Firmware
- Firmware
- Klipper on Linux
- Controller
- 32-bit ARM processor
- Stepper drivers
- TMC2209 silent, StallGuard-enabled
- Power
- 110 / 220 V AC
Display & Connectivity
- Display
- Full-HD HDMI touchscreen
- Connectivity
- Wi-Fi
Physical
- Shipping box
- 26 × 26 × 30 in (660 × 660 × 762 mm)
- Shipping weight
- ≈ 30 kg
In the box
- Assembled machine
- Power cable & toolkit
- Quick-start guide
QALAM Pro 400 — questions & answers
How much does the QALAM Pro 400 cost in Pakistan?
The QALAM Pro 400 costs ₨ 375,000. It is ordered on WhatsApp only and paid by bank transfer. We confirm stock, delivery time and the delivery cost to your city before you pay.
What materials can the QALAM Pro 400 print?
PLA, PLA+, PETG, ABS, ASA, HIPS, PC, TPU/TPE, Nylon (PA, PA12), CF/GF composites. A 350 °C all-metal hotend, a heated bed up to 125 °C and a fully enclosed chamber let it print engineering materials such as ABS, ASA, polycarbonate and nylon without warping.
How fast is the QALAM Pro 400?
Up to 500 mm/s with 11,000 mm/s² acceleration on a CoreXY motion system, with input shaping and pressure advance.
QALAM Pro 300 or QALAM Pro 400: which should I buy?
Both share the same platform, speed, hotend and touchscreen — the difference is size. The QALAM Pro 300 builds up to 300 × 300 × 300 mm (₨ 275,000); the QALAM Pro 400 builds up to 400 × 400 × 400 mm for large parts and production batches (₨ 375,000).
What warranty does the QALAM Pro 400 come with?
A 6-month warranty from delivery. For a fault, message 3DISM on WhatsApp.
How is the QALAM Pro 400 delivered?
To any city in Pakistan. We confirm the courier, timing and delivery cost with you on WhatsApp before dispatch, and the machine is handed over only to the buyer.
Ready when you are.
Order the QALAM Pro 400 on WhatsApp — or if you need a more compact machine, have a look at the QALAM Pro 300.